Single access point WB-2 – access points to modern interactive services through wired and wireless data transport networks.
IPTV transmission through Wi-Fi at 5 GHz frequency The device provides advanced functionality for sustainable IPTV delivery through wireless network: smooth and uninterrupted video playback is provided by special software functionality. The router allows working at 2.4 and 5 Ghz frequencies and also provides simultaneous video streams broadcast and data transmission.
Simplified administration Centralized configuration loading, intelligent update of software and data collection on subscriber devices are realized in TR-069-based Eltex.ACS system. This system provides simplicity of Eltex CPE management and decreases operating expenses (OPEX) for network maintenance.
Customization Provides WB-2 device branding for corporate identity of service provider, increasing trade mark loyalty of proposed solution for a home user. The following means of customization are available: case color changing, logo placement, expansion of complete set and other options by additional request.
Main technical features
Realtek processor 520 MHZ
RAM 128 МB
Flash 8 МB
1 WAN 10/100/1000Base-T (RJ-45) port
2 LAN 10/100Base-T (RJ-45) ports
1 USB 2.0 ports
Wi-Fi IEEE 802.11b/g/n 2.4 GHz and 802.11a/n/ac 5 GHz
Static IP address
Wi-Fi media bridge
3G/4G line adapters via USB
Router/bridge mode operation
DHCP server on the LAN side
Static and dynamic routing
VLAN (realised VLAN per service model)
Multiservice model: separate network settings configuration per service (Internet, VoIP, IPTV)
«3G router» mode
Time synchronization via NTP
Limited access to the device through WAN and LAN
WPA/WPA2 encryption standarts
Extended parameter list of Wi-Fi interface configuration
Wireless Multicast Forwarding
Wi-Fi IEEE 802.11a/b/g/n/ac
1 external aerial
Frequency coverage: 2412-2472 MHz, 5180-5320 MHz, 5660-5805 MHz
Channel transfer rate - up to 433 Mbps (802.11ac)
- 2.4 GHz (802.11b/g/n): up to 15 dBm
- 5 GHz (802.11a/ac): up to 17 dBm